Tag: Iterative

Iterative Design: Bent Space

Precedent_Eames Leg Splint

Choose your corner, pick away at it carefully, intensely and to the best of your ability and that way you might change the world.

–Charles Eames

This project started with the case study of the Eames Leg Splint and proceeded as a pursuit of rigorously modular order in a carefully plannedspace designed by Richard Meyer. The formal and plastic properties of the Leg Splint Sculpture were investigated, because the sculpture was is a cut-out which bears minimum bending stress, it serves as a control piece on the curvature and opening of the web piece. A “clean up” process took place, which reduce the piece to its minimal and most operable unit.
 .

5fb7e88011459.5602a8d2ec225.jpg

986d3d8011457.5602aab741738.jpg

Then aggregation methodology and connection were then experimented under the 4‘by10’ plywood size limit. When it was placed on the site, the gridded box of Meyer was divided by his  6‘by6’ invisible planned cubes, into chambers based on circulation, which is the two perpendicular access between the four sides of the site , and also the spins and turns that people make in the cafeteria. The piece starts from one corner of the box, and bifurcate as much as they can. One of the four modules are picked as the piece grow, according to the assigned nature of the particular chamber.

c66db38011461.5602aab65a25c

The drawing is a combined axometric and machine assembly representation: the axometric shows how the aggregation behave in different chambers and the machine assembly drawing is exploded according to the aggregation and proposed construction order. It explains the layering order and how the curvature and its control points of the formwork is translated to the plywood sheets.

e6b3cf7977223.5602a839f0e56.jpg